Corrosion proof type flow meters use inline installation. Pipe shell is made of carbon steel
coated with Teflon both inside and outside, which secures the anticorrosion capability.
The shell of probe is made of Titanium. Our experiment shows our probe is corroded 4um
per year when it is put into hydrochloric acid with 29% concentration. Thus it takes more
than 10 years to run out of the coating on the shell. As most of aggressive gases are much
less corrosive than hydrochloric acid, our meter is a reliable choice to measure them.
Specifications：
Flow range | 0.4-60m/s,0.4-80m/s（velocity of flow） |
Accuracy | |
Repeatability | ±0.2%FS |
Response time | < 100 ms |
Sensitivity | < 0.05 m/s |
Flow temperature | -20～+120℃、-20～+200℃、-20～+300℃ |
Ambient temperature | -20～+55℃ |
Working pressure | 0～0.8MPa 、0～2.5MPa 、0～5.0MPa |
Explosion Protection | dⅡCT2～6 |
Ingress Protection | IP65 |
Power supply | |
Output | 4～20mA、optional：RS485、HART |
Sensor material | optional: Tantalum for corrosion proof version |
中文簡體
滬公網(wǎng)安備31011702890168